Ripack 2200 - Flame and Combustion Issues; Nozzle Not Activating

22
PROBLEMS CAUSE REMEDIES
The ambient
temperature is
low and the
appliance is
b e i ng us e d
intensively.
Alternate between several
bottles.
The inject or is
blocked.
Clea n t he i nject or (see
"Cleaning".)
The rubber hose is
twisted.
Put it back in its initial position.
• Flame is lower.
• Internal
combustion.
• Combustion
nozzle gets hot.
The nozzle grille is
blocked by particles
suspended in the air
(working in polluted
environment).
Clean the grille
and the venturi of
the RIPACK 2200
(see "Cleaning").
The combustion
nozzle has
insufficient power.
The combustion
nozzle does not go
out immediately.
The trigger
valve is
jammed or
blocked.
Close the gas bottle valve and
have your appliance checked by
your RIPACK dealer.