f. Upon reaching the assigned point, an “Anchor" symbol will appear on the screen, accompanied
by a gentle vibration every 3 seconds as a prompt. Please long press the Hopper button to
release the berley or baits manually.
If you want to cancel the task in the middle way, just press and hold the “Enter/ESC” button till
canceled.
3.1.5.3 EXIT THE AUTO MODE
When you select either the "Return to Home" or execute an A/B point mission, you are in the auto
mode. When the boat reaches the designated waypoint, an “Anchor” will appear in the screen and
your boat still stays at the auto mode. If you want to switch to manual control, you need to press and
hold the Enter/ESC button to exit the auto mode.
If you have used the “Rippton Boat” app to perform an auto task and want to regain control using the
remote, you also need to press and hold the Enter/ESC button to exit the auto mode.
To Next Page
Loading...