3
Introduction
The user-friendly wired LCD & Proximity keypad enables simple operation and
programming of the LightSYS (version 5.63 and above) and ProSYS Plus (version
1.2 and above) security systems, and for the CS (Version 3.1.0.0003).
Main Features
Optional built-in proximity tag reader
Wa
ll mounting by screws
Wall tamper
protection
Modern look and fee
l
Simple to install with incorporated mounting bracket
Installation
Mounting the Keypad
Mount the keypad on the wall using the supplied mounting bracket.
To mount the keypad:
Figure 1 Figure 2
1. Separate the mounting bracket from the keypad (see Figure 1).
2. Insert the wi
res through the hole in the mounting bracket (see Figure 2)
.
3. Use the mounti
ng holes as a template and secure the mounting brac
ket to the
wal
l using 4 screws and 1 extra screw for the tamper (see Figure 3).
EN
To Next Page