PANEL MESSAGES
[ 17 - 39 ]
8. MIB (Management Information Base) error
Error type
L01-***
!! No Linked Printer Detected !!
Check Cable Connection and Power Supply for Linked Printers
Reset method
Error point
917
Laser Beam Printer (LBP) communication error (network error during NET-C initialization)
914
916
Link-mode
Mach ine
Linked printer power OFF / Linked printer does not support SNIP, etc.
Panel display
915
L01 [Communication error in MIB information acquisition]
Unable to transmit data even after 3 second wait / No reply from the linked printer / Link
disconnected from the linked printer / TCP/IP of the NET-C is not activating / Data interruption
from RN, etc.
No reply back from NET-C even after 50 seconds wait.
Communication error from the linked printer.
No information reply back from the linked printer.
Printer information request error.
Check linked printer power source and cable connections, or change the output to one of other
linked printers.
Error conditions
To Next Page
Loading...
