Riso SF9 Series - Chapter 1 Installing the Printer Driver; Usb Connection; Installing the Printer Driver

8
Chapter 1 Installing the Printer Driver
8
Chapter 1 Installing the Printer Driver
USBConnection
InstallingthePrinterDriver
This section describes how to install the Printer Driver for windows supporting the Plug&Play installation when your
computer and the RISO printer are connected via USB cable.
(Regarding the procedure for manual installation, see
A
66.)
B
Youarerequiredtohavetheadministrator’sprivilegetoinstalltheprinterdriverprograminyourcomputer.
B
ThisPrinterDriverdoesnotsupportserverOSorprintersharing.
B
UseacommerciallyavailableUSBcable(Hi-speedUSB,3morless).
To update the Printer Driver, change cable connections or reinstall a Printer Driver of the same series, deletion
of the driver package is required. Uninstall the installed Printer Driver manually before new installation. “Manual
uninstallation” (
A
66)
0
B
DonotconnecttheUSBcableuntilyouareinstructedtodoso.
1
Insertthe[RISOPrinterDriver]DVD-ROMintoyourcomputer’sDVD-ROMdrive.
The installer is started. If the installer does not start up, double-click on the [Setup(.exe)] le in the folder below.
Fora32-bitOS:
(DVD-ROM):[Windows 32-bit] folder
Fora64-bitOS:
(DVD-ROM):[Windows 64-bit] folder
B
If the [User Account Control] dialog appears, click [Yes] or [Allow] (for Windows Vista).
2
Selectyourlanguagefromthedrop-downlist,thenclick[OK].