Riso SF9 Series - Page 40

38
Chapter 2 Working with the Printer Driver
38
Chapter 2 Working with the Printer Driver
4
Checkprintconditions.
● Specify the number of copies to be printed within the following range : 1 to 9,999.
● Never fail to deselect the [Collate] box. If it is selected, the master-making operation will be repeated for every
copy.
The displayed items in the [Print] dialog box vary depending on the application software.
Remove the check mark for
[Collate].
B
Ifyouwanttoprintaleconsistingofseveralpages,andtheleincludedifferentpapersizesorpage
directions,printingmayfailwhenyouchoose[All]forthepaperrange.Specifypagenumberstoprintfor
thoseofsamepagesizeordirection.
Ifyouwanttosetadditionalprintconditionsforthecurrentprintjob;
Open the [Properties] dialog box by clicking [Properties] in the [Print] dialog box.
B
Someprintersettingsarenotavailabledependingonaccessprivileges.
[Basic]Tab (refer to
A
42 for detailed settings)
B
Settingsofpapersizeandpagedirectionforthistabshouldbeidenticalwiththoseintheapplication
softwaretobeused.