To Next PageTo Next PageHow to fix a paper jam error on a Riso SF9390?
To resolve a paper jam error on your Riso printer: * Open the ADF cover and remove any jammed originals. * Check the paper feeding side and lower the paper feed tray to remove any jammed papers. * Pull out the print drum (cylinder) and remove any jammed papers. * Check the paper receiving side and remove any jammed papers.
What to do if my Riso SF9390 Printer shows a consumables error?
If your Riso printer displays a consumables error, you may need to replace the ink cartridge, the master roll, or both with new ones.
How to resolve a master jam error on a Riso SF9390?
To resolve a master jam error on your Riso printer: 1. Pull out the master making unit, and then set a master roll in place correctly. 2. Pull out the print drum (cylinder), and then remove the master on the print drum (cylinder). 3. Take out the master disposal box, and then remove the jammed master. 4. Check for any obstacles under the paper feed tray or on the paper. 5. Insert the lead edge of the Master into the Master Entrance and close Master Making Unit.
Why does my Riso printer show an installation check error?
An installation check error on your Riso printer may occur due to: * An improperly set print drum (cylinder). Ensure it is correctly placed. * An incorrect type or color of ink cartridge. Verify you are using the appropriate cartridge. * An inappropriate type of master roll. Check that the master roll is correct for your printer. Also, try removing the ink cartridge and setting it again.
What should I do if my Riso printer displays a maintenance call error?
If your Riso printer shows a maintenance call error, consult your dealer or authorized service representative for battery replacement or periodic inspection.
General| Type | Digital duplicator |
|---|---|
| Max Print Resolution | 600 x 600 dpi |
| Resolution | 600 x 600 dpi |
| Print Speed | 150 pages/min |
| Original Size | Max 297 x 432 mm |
| Paper Weight | 46 - 210 g/m² |
| Paper Size | A3, A4, A5, B4, B5, custom sizes |
| Print Area | Max. 297 x 420 mm |
| Paper Feed Tray Capacity | 500 sheets |
| Paper Receiving Tray Capacity | 250 sheets |
| Master Ejection Capacity | 100 masters |
| Ink Colors | Black, Blue, Red, Green |
| Power Consumption | 300 W |
| Weight | 85 kg |
| Connectivity | USB 2.0, Ethernet |
