To Next PageTo Next PageWhat to do if a paper jam has occurred around the Print Drum of my Riso RZ?
If a paper jam occurs around the Print Drum of your Riso Printer: 1) Pull out the Print Drum. 2) Remove any jammed paper carefully, avoiding contact with the paper separation hook to prevent injury.
How to fix a paper jam on the Paper Feed Tray section of my Riso RZ?
If a paper jam occurs on the Paper Feed Tray section of your Riso Printer: 1) Remove the jammed paper. 2) Set the paper again. 3) If the error indications do not disappear, press the key.
What to do if a paper jam has occurred on the Paper Receiving Tray section of my Riso Printer?
If paper becomes jammed on the Paper Receiving Tray section of your Riso Printer, remove the jammed paper. If the error indications do not disappear after removing the paper, press the key.
How to resolve if a master has not been correctly set in my Riso RZ?
If a master has not been correctly set in your Riso Printer, open the Master Making Unit Cover, remove the master roll, and set the master correctly. If the master is loose, turn the right flange inward to correct it, and close the Master Making Unit Cover.
What should I do if a master has not been correctly cut in my Riso RZ?
If a master has not been correctly cut in your Riso Printer: 1) Remove the master roll and close the Master Making Unit Cover. 2) Set the master again.
How to resolve a master jam that has occurred in the master disposal section of my Riso Printer?
If a master jam occurs in the master disposal section of your Riso Printer: 1) Remove the Master Disposal Box. 2) Stand at the side of the Paper Feed Tray and push down the Master Disposal Roller Release Lever at the inside right. 3) Remove the master jammed on the roller section. 4) Push the Master Disposal Roller Lock Lever inward. 5) Set the Master Disposal Box.
General| Category | Digital Duplicator |
|---|---|
| Stencil Making Time | Approx. 20 seconds |
| Connectivity | USB |
| Original Size | Maximum: 11.7" x 17" (297 mm x 432 mm) |
| Ink Colors | Black |
| Paper Size | A4, A3, B4, B5, Letter, Legal |
| Dimensions | 680 x 630 x 520 mm |
Identifies all physical parts and components of the RISO RZ Series model.
Details the main and sub control panels, explaining each key and indicator function.
Provides essential safety precautions and guidelines for installing the machine correctly.
Explains the correct procedures and safety warnings for connecting the machine to a power source.
Specifies the types, sizes, and weights of paper suitable for printing with the machine.
Guides on setting up paper feed and receiving trays before initiating print jobs.
Outlines safety precautions for handling the machine during operation and general use.
Describes the fundamental master-making and printing workflows for the machine.
Details the step-by-step procedure for printing from physical documents or books.
Explains how to choose the optimal mode (Line, Photo, Duo) for scanning different types of originals.
Covers methods for adjusting the size of originals during the scanning process.
Describes the function for printing two originals side-by-side on a single sheet.
Explains how to enable automatic execution of master-making and printing processes.
Details how to create sample prints to check quality after adjusting settings.
Guides on selecting and adjusting the print density from five available levels.
Explains how to adjust the vertical and horizontal print positions for accurate output.
Covers selecting the print speed from five different levels for optimal performance.
Describes the programmed printing function for sorting copies into multiple groups.
Explains how to modify default settings for various machine functions.
Details the procedure for setting IP addresses for network connectivity.
Provides instructions for safely replacing the ink cartridge when it is empty.
Guides on how to replace the master roll when it has been consumed.
Explains the correct procedure for removing and reinstalling the print drum.
Outlines critical safety precautions to be followed before cleaning the machine.
Details the process for cleaning the thermal print head for optimal performance.
Instructions for cleaning the platen glass and cover to maintain print quality.
Explains how to clean the pressure roller to prevent smudges on copies.
Explains how to interpret error codes and indicators shown on the machine's display.
Provides common problem solutions and actions to take before contacting service.
Lists and briefly describes available optional accessories to enhance machine capabilities.
Provides technical details and specifications for different RISO RZ models.
Compares the features available across different RISO RZ model series.
