Ritmo BASIC 160 V1 - Welding General Criteria; Transport and Handling Criteria; Pre-Welding Checks; Measuring Instruments Overview

2. WELDING GENERAL CRITERIA ﻠﻟا ﺮﻴﻳﺎﻌﻣﺔﻣﺎﻌﻟا مﺎﺤ
2./1
ﺮﻴﺳاﻮﻤﻟا ﻞﻘﻧ ﺪﻨﻋ مﺎﺘﻟا ﻩﺎﺒﺘﻧﻻا ﺐﻠﻄﺘ
ﻳ
/ ﺎﻬﻠﻴﻤﺤﺗو تﺎﺒﻴآﺮﺘﻟا /ﺔﺒﺳﺎﻨﻤﻟا ﺔﻴﻜﻴﻧﺎﻜﻴﻤﻟا ةﺰﻬﺟﻷا ماﺪﺨﺘﺳﺎﺑ ﻚﻟذ ﻢﺘﻳ نأ ﺐﺠﻳو ،ﺎﻬﻨﻳﺰﺨﺗو ﺎﻬﺘﻟوﺎﻨﻣو ﺎﻬﻐﻳﺮﻔﺗ .
ﻞﻴﻤﺤﺘﻟاو ﻞﻘﻨﻟا ﻎﻳﺮﻔﺘﻟا
و شوﺪﺨﻟا دﻮﺟو ﺐﻨﺠﺗ ﻢﻬﻤﻟا ﻦ
ﻣ
/ﺮﻴﺳاﻮﻤﻟا ﻰﻠﻋ ﺔﻘﻴﻤﻌﻟا تاﺰﻳﺰﺤﺘﻟا وأ/تﺎﺒﻴآﺮﺘﻟا .ﻻ ﺮﻴﺳاﻮﻤﻟا ﺮﺠﺗ/ ةدﺎﺤﻟا وأ ﺔﻨﺸﺨﻟا ﺢﻄﺳﻷا ﻰﻠﻋ تﺎﺒﻴآﺮﺘﻟا)ﺔﻴﺒﻧﺎﺠﻟا حاﻮﻟﻷا ﻞﺜﻣ
ﺦﻟإ ،ﺔﻳﺮﺨﺼﻟا ﺔﺑﺮﺘﻟا ،ﻞﻤﻌﻟا تاودأ ،ﺔﻨﺣﺎﺸﻟﺎ
ﺑ
.(
The transport, loading / unloading, handling and storage of the pipes/fittings require extreme attention, and must be done by
means of suitable mechanical devices.
Transport and Loading Unloading
It is essential to avoid deep scratches and/or notches on the pipes/fittings. Do not drag the pipes/fittings on rough or sharp
surfaces (such as truck side-boards, work tools, rocky soil, etc.).
مﺎﺤﻠﻟا ﻞﺒﻗ
سﺎﻴﻘﻟا ةﺰﻬﺟأ:
ﺮﺘﻣﻮﻣﺮﺘﻟا ﺮﺘﻣﻮﻧﺎﻤﻟا ﺖﻗﺆﻤﻟا
ﻢﻬﻔﺋﺎﻇو ﻦﻣ ﻖﻘﺤﺗ.
ةاﻮﺴﻤﻟا
ﺎﻬﺘﻔﻴﻇو ﻦﻣ ﻖﻘﺤﺗ.
ﺔﻴﻓﺎآ ﺔﺟرﺪﺑ ةدﺎﺣ تاﺮﻔﺸﻟا نأ ﻦﻣ ﺪآﺄﺗ.