Ritmo ELEKTRA LIGHT - Safety Precautions

24
EN
Precision of the ambient Thermometer
± 1 °C
Protection Degree
IP 54
Sleeve connector diameter
F 4 ÷ 4.7 mm
Coding according to ISO 12176-2
P
2
2US
2
VADX
Simulation curve at 36V output
Soft Start
Enabled
Temperature
compensation at
ambient
temperature
Enabled (according to ISO 13950)
fitting
Not enabled
Memory Capacity
325 reports
LpA<70dBA
FEATURES
• Transport bag
• Manual scraper
OPTIONS
• Building site serial printer kit (serial printer and cable included)
• Serial/USB data transfer adapter cable
• Ritmo Transfer Software (multi-language)
• Barcode reader
4. SAFETY PRECAUTIONS
IMPORTANT: PLEASE READ CAREFULLY AND FOLLOW ALL THE INSTRUCTIONS HEREIN BEFORE
START USING THE MACHINE!
➢ ATTENTION PLEASE! Safety instructions against electrocution and fire hazards must be
respected at all times when using electrical appliances.
➢ KEEP THE WORKSPACE CLEAN, TIDY AND PROPERLY ILLUMINATED. Clutter and/or lack of
proper light on the workspace may cause accidents. Always keep a suitable and
sufficient lighting in the workspace.
➢ BEWARE OF WEATHER CONDITIONS. Do not expose the machine or any other electrical
tool to rain and/or extreme heat. Do not use the machine or any other electrical tool
in moist places and/or near liquids or inflammable gases.
➢ PROTECT YOURSELF AGAINST ELECTROCUTION. Avoid body contact with earthed
objects. Pay attention to cables put under tension.
➢ DO NOT ALLOW UNAUTHORISED PERSONNEL IN THE WORKPLACE. Only authorized
personnel must have access to the working place and equipment.
➢ KEEP ALL WORKING EQUIPMENT IN A SAFE PLACE. Tools, machines, all working devices
in general must be stored in a dry place, inaccessible to unauthorized personnel.