Rittal PDU metered Series User Manual

EN
28 Rittal PDU metered/metered plus/switched/managed
 Select the "IP Configuration" entry and press the "Return" key
to confirm your selection. The menu for entering your security
PIN will appear.
 Keep pressing the "Up" key (fig. 12, item 2) or the "Down" key
(fig. 12, item 5), until the required digit is displayed in the first
position of the PIN.
 Press the "Return" key to move to the second position of the
PIN.
 Once again, keep pressing the "Up" key or the "Down" key until
the required digit is displayed in the second position of the PIN.
 Move to the third and fourth positions of the PIN and set them
in the same way.
Note:
"1221" is the preset PIN for accessing the configuration menu. This PIN can be modified
via the PDU website.
 Make a note of the new PIN number and keep it somewhere safe.
 Finally, press the "Return" key (fig. 12, item 8). The DHCP
menu will appear. The "
" symbol marks the current DHCP
setting.
Settings of the PDU

Rittal PDU metered Series Specifications

General

Brand	Rittal
Model	PDU metered Series
Category	Power distribution unit
Language	English