How to fix Inverter cooling error in Rittal VX25 Blue e+?
The inverter heat sink in your Rittal Chiller is dirty. Remove the roof plate and side panels and clean the heat sink, e.g. using compressed air. The error message will terminate automatically approximately 30 seconds after it has been resolved.
Why does my Rittal Chiller show a check voltage error?
You are operating your Rittal cooling unit outside of the admissible voltage ranges. Check the power supply to the cooling unit and observe the specifications on the rating plate.
What to do if there is an air routing problem with my Rittal VX25 Blue e+ Chiller?
The air inlet or outlet of your Rittal Chiller is blocked. Remove the blockage and ensure that minimum distances from the air inlet or outlet to components inside the enclosure are observed.
What causes Fan alarm 2 on a Rittal VX25 Blue e+ Chiller and how to fix it?
The fan in your Rittal Chiller is defective. Replace the fan. You may order the required spare part directly from Rittal.
Why Rittal VX25 Blue e+ Chiller shows Ext.temp. range error?
Your Rittal Chiller is being operated outside of the admissible ambient temperature. Ensure that the ambient temperature does not exceed the admissible range.
What to do if Rittal VX25 Blue e+ Chiller shows fan alarm 1?
If the fan in your Rittal Chiller is blocked, check for a visible blockage and remove it. If no blockage is visible, replace the fan. You may order the required spare part directly from Rittal.
How to clean the condenser on a Rittal VX25 Blue e+?
If the condenser in your Rittal Chiller is dirty, remove the roof plate and side panels. Then, clean the heat exchanger, for example, using compressed air. The error message will terminate automatically approximately 30 seconds after the issue has been resolved.
To Next Page
General