17
Legal and
Regulatory Information
16
Wireless Transmitter Module Frequency Range
WLAN: 2.412-2.472GHz
Wireless transmitter module power < 20dBm
FCC Statement
FCC-ID: 2A7ZZ-3A-03
Labeling Requirements
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Information To The User
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
EMC Class A
Note: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense.
To comply with RF exposure requirements, a minimum s
eparation distance
of 0.00 cm must be maintained between the user’ s body and the handset,
including the antenna.
To Next Page
Loading...