The Rize Split Adjustable Bed is a sophisticated and versatile sleep system designed for in-home comfort, offering a range of features to enhance the user's sleeping experience. This owner's manual provides comprehensive information on safety precautions, parts, installation, remote control operation, troubleshooting, and warranty details.
Function Description:
The Rize Split Adjustable Bed allows users to customize their sleeping position by independently adjusting the head and foot sections. It is designed to provide comfort and support, catering to individual preferences for reading, watching TV, or simply relaxing in bed. The "split" designation likely refers to its ability to operate two separate adjustable bases, allowing for individual control on each side of a larger bed (e.g., King size). The bed is equipped with lift motors that enable smooth and quiet adjustments. It is intended for residential use and is not designed for hospital or convalescent care, nor is it equipped with features like side rails for patient assistance.
Important Technical Specifications:
- Weight Limit: The bed has a weight limit of 750 lb, which must be evenly distributed across the head and foot sections when a person is lying down. Exceeding this limit or concentrating weight on a single section (head or foot only when raised) can damage the bed or cause injury.
- Duty Cycle: The bed lift motors are designed for intermittent use, with a duty cycle of approximately 10%. This means continuous operation should not exceed 2 minutes within an 18-minute period. Exceeding this rating can shorten the product's life expectancy.
- Power Source: The bed requires a grounded electrical outlet and the use of a surge protector (not included) is highly recommended to protect the electronics.
- Leg Height: The legs are modular, allowing for customizable bed height using combinations of 8", 3", and 2" leg sections. All legs must be set to the same height for stability.
- Model Number: GYOX4.
Usage Features:
- Adjustable Positions: The bed offers independent adjustment of the right head, left head, and foot sections. This allows users to find their optimal comfort position.
- Remote Control: The bed comes with two remote controls, one for the right head (HR) and one for the left head (HL), indicating its split functionality. Each remote features buttons for adjusting head up/down, foot up/down, a "FLAT" button to return the bed to a flat position, and a "MEMORY" button to save a favorite position.
- Memory Function: Users can save their preferred bed position by adjusting the sections and then pressing and holding the "M" button for 3 seconds until a beep confirms the position is saved.
- Flashlight: The remote control includes a flashlight feature, activated by pressing the "FLASHLIGHT" button.
- Quiet Operation: While normal operation may produce a minimal humming sound, the manual suggests placing carpet or rubber caster cups under the legs to reduce resonance, especially on hardwood floors.
- Mattress Retainer Bar: A mattress retainer bar (or two for King size) is included to keep the mattress securely in place during adjustments.
Maintenance Features:
- Cleaning: Before cleaning or servicing the base, it is crucial to always unplug the bed from the electrical outlet.
- Cord Care: Keep the power cord away from heated surfaces. Discontinue use if the cord or plug is damaged or dropped in water, and contact qualified service personnel for repair.
- Battery Replacement: The remote controls require AAA batteries. Users should check and replace batteries as needed, ensuring they are properly installed according to the markings in the battery compartment.
- Troubleshooting Guide: The manual provides a detailed troubleshooting section to help users diagnose and resolve common issues, such as the bed not responding, remote control not working, or stuttering during motion. This includes steps like checking power connections, remote pairing, and battery status.
- Surge Protector Recommendation: The use of a surge protector is recommended to protect the bed's electronics from power fluctuations.
- Regular Inspection: Users are advised to ensure the bed is in a flat position before unplugging from the power source and to clear any clutter or obstructions from under and around the bed to prevent interference with movement.
The Rize Split Adjustable Bed is backed by a comprehensive warranty, including a 1-year period for labor, a 3-year period for all components, and a 20-year prorated period for the bed frame. Users are encouraged to register their product for warranty purposes.
Need help?
General
To Next Page
