Operator’s Guide Inspector D4000™ Auto Optic
002-5564 RJS, Minneapolis, MN
accordance with this operator’s manual, may cause
harmful interference to radio communications. Operating
this equipment in a residential area is likely to cause
harmful interference in which case the user will be
required to correct the problem at your own expense.
1.5 Documentation Updates
RJS strives to provide the best possible documentation.
This manual, or any of our manuals, may be updated
without notice.
1.6 Copyrights
The copyrights in this manual are owned by RJS. All
rights are reserved. Unauthorized reproduction of this
manual or unauthorized use of the software may result in
imprisonment of up to one year and fines of up to
$10,000 (17 U.S.C.506). Copyright violations may be
subject to civil liability.
1.7 Unpacking and Inspection
Carefully unpack the components and save the
container. If the container is crushed, punctured or
water damaged you can use the container to prove a
claim against the carrier. RJS is not responsible for
transportation damage.
Your RJS Inspector D4000 is packaged in a custom made
container. After removing the unit from the shipping box
makes sure you have:
Main display unit
Auto-optic scan head and cable
Calibration plaque
Four size AA batteries
Operator’s manual
Bar code “test” symbol sheet
To Next Page
Loading...