Changing the password
Password protection can be used to keep your data secure by preventing
unauthorised access to the system and Setup program. By default, the Setup
program is protected by a password.
The password can be a maximum of eight characters, i.e. you can use any
letter or number. The password may be case sensitive. Be very careful to
choose a password that you will not forget and others will not be able to
guess.
CAUTION: You should change the default password as soon as you receive
your notebook. If YOU do not change the default password, someone else
may change it for you and prevent you from accessing the system. If you
forget your password, you will need to ring the RM helpline, or return your
notebook to RM to be reset. This reset is not covered by your warranty
agreement. REMEMBER THIS BEFORE YOU CHANGE YOUR
PASSWORD - CHOOSE A PASSWORD THAT YOU WILL
REMEMBER.
The first time you change the password
The first time you select this option, you will need to enter the default
password. The default password is the password that has been set up by
Research Machines for use until you change the password.
The default password is RM
When you have entered the default password correctly, the system prompts
you to enter the new password. You will have to enter the new password
twice for confirmation.
To Next Page
Loading...