Need help?Do you have a question about the Roadmaster InvisiBrake and is the answer not in the manual?
General| Type | Supplemental braking system |
|---|---|
| Compatibility | Most motorhomes and towed vehicles |
| Installation | Permanent |
| Activation | Automatically activated when the motorhome's brakes are applied |
| Power Source | 12V |
| Breakaway System | Included |
Ensures brake pedal is in the correct position when towing to prevent unintended braking or failure.
Check controller for interference with seat movement to prevent damage.
Steps for connecting monitor cord, break away cable, and turning on park lights.
Automatically releases braking pressure after 15 seconds of continuous braking.
Action to take when the towed vehicle's brakes are continuously applied.
Procedure for adjusting braking pressure, including testing and warnings.
Tests for braking confirmation, monitor function, and extended braking protection.
Procedure to test the break away system's functionality.
Diagnoses issues like missing fuses, bad grounds, or improper wiring.
Addresses issues like moisture causing unintended activation.
Troubleshoots why the monitor LED may not be working.
Addresses issues related to electrical feedback or diodes affecting braking release.
Explains why hazard lights may cause temporary InvisiBrake cycling.
Troubleshoots why the motorhome monitor light remains illuminated.
Addresses situations where the air compressor runs but shows no pressure.
To Next Page