Need help?Do you have a question about the Roadmaster Invisibrake 8700 and is the answer not in the manual?
General| Type | Supplemental Braking System |
|---|---|
| Installation | Professional installation recommended |
| Breakaway System | Included |
| Power Source | 12V Vehicle Battery |
| Warranty | 1 year limited warranty |
Lists key technical specifications for the InvisiBrake controller unit.
Explains safety alert symbols (WARNING, CAUTION) and their meaning.
Crucial checks before installing InvisiBrake, including vehicle compatibility and electrical system verification.
Route wiring safely to avoid short circuits, moving parts, sharp edges, or fuel lines.
Guidance on selecting optimal mounting locations for the controller, pulley, and cable anchor bracket.
Route the cable with minimal curves to ensure proper air pressure for braking.
Attach brake pedal clamp, pulley, and cable anchor bracket to the vehicle.
Route cable housing, attach air line, and connect vacuum line to power brake booster.
Check lighting, install break away system, and attach four-wire harness and controller.
Route monitor harness, seal firewall, mount LED, and connect audio circuit board.
Connect vehicles and perform stationary tests for braking, monitor, and protection modes.
Conduct test drives to evaluate braking performance and adjust brake pressure settings.
To Next Page