Roadmaster Even Brake 98400 User Manual

ROADMASTER, Inc. • 6110 NE 127th Ave. • Vancouver, WA 98682 • 800-669-9690 • Fax 360-735-9300 • roadmasterinc.com
© 2006-2018 ROADMASTER, Inc. All rights reserved. 853300-14 11/18
CAUTION
Check the Even Brake serial number before continuing.
This kit is compatible ONLY with Even Brake systems with serial numbers of 27,496 and below. Check the
serial number on the bottom of the Even Brake unit before proceeding.
cable not
included
Even Brakes with a
black cable need second vehicle kit 98400
cable not
included
Even Brakes with a
blue cable need second vehicle kit 98450

Roadmaster Even Brake 98400 Specifications

General

Brand	Roadmaster
Model	Even Brake 98400
Category	Automobile Accessories
Language	English

Summary

Statement of FCC Compliance

Product Components

Before You Begin Installation

Installation Instructions

Install Break Away System

Mount the break away switch and route the wiring harness through the firewall.

Towed Vehicle Lighting Modifications

Adapt towed vehicle lighting systems to work with the supplemental brake.

Install Brake-Lite Relay

Install the Brake-Lite Relay if required by specific lighting system configurations.

Wire and Attach ICX Transmitter

Connect the ICX transmitter to the break away harness, power source, and ground.

Program Motorhome Monitor

Configure the motorhome monitor to communicate with the ICX transmitter.

Test All Functions

Verify the proper operation of the entire Even Brake system after installation.

Alternative: Install Six Diodes