10
Operating instructions
Power on/off: Power on/off
a. Turn your key to the right to turn on, turn your key to the left to turn
off.
b. Long press the power button to turn the LCD display on/off.
c. Press power button once quickly to switch gears (default is gear 1).
Gear setting: Press the button located on the throttle to switch gears.
Kick Start Mode: The throttle system will work once the scooter reaches 2
MPH. Press the throttle smoothly to accelerate. Refer to P-settings on how to
change.
Brake control: Left-hand brake = rear brake and right-hand brake = front
brake. Use both brakes simultaneously to stop quickly.
Headlights: When the scooter is powered on, push the headlight button
downward to turn on all lights. Push the light button upward to turn all lights
off.
Cruise control: When cruise control is turned on, it will automatically be
activated when you reach a consistent speed. Release the thumb accelerator
and the scooter will automatically move to the set speed. To cancel the cruise
control, pull either brake lever, and cruise control will turn off.
To Next Page
Loading...