RoadRunner D4+ 4.0 - Installing Steering Damper

16
Installing Steering Damper
Before you begin installing the Steering Damper, make sure we have all the
necessary tools and hardware. The hardware includes the following (all included
in box);
- 2x M6x1.0, 18mm long
bolts
- 2x M8x1.25, 35mm long
bolts
- 2x M8 spring washers
- 2x M6 washers
- 2x M8x1.25 locking nuts
- 1x long threaded dowel
- 1x shorter threaded dowel
- 1x steering damper
- 1x steering damper clamp
For tools, you will need the following:
- 1x 5mm allen wrench
- 1x 6mm allen wrench
- 1x 13mm socket wrench (adjustable
spanner works too, it is just more time
consuming)
- Blue Thread Locker (optional)