12
Maintenance
Always check your scooter regularly to ensure all screws are tight. Screws can
become loose over time with vibration and movement. Tighten them as needed.
1. Battery
a. Be sure to fully charge your scooter’s battery before your first ride.
b. When storing scooter during cold months, store a climate controlled
environment to avoid battery damage.
2. Storage and daily care
a. Do not store your scooter in direct sun or in a damp area.
b. Keep your scooter clean of dirt and debris build-up, especially in
brake and motor areas.
Adjusting the Stem Height
It is extremely important to make sure the fastening clasp is extremely tight before riding
the D4+ 4.0 Electric Scooter.
To adjust the stem height:
1. Pull the fastening clasp outwards
so the clasp is open.
2. Loosen the fastening clasp
counterclockwise.
3. Gently press the silver button to
adjust the stem up or down as
desired. (There are 3 heights to
choose from).
4. Once adjusted to desired height,
tighten the fastening clasp
clockwise and push back into the
stem so it is snug and tight.
To Next Page
Loading...