5
Charging the Scooter
1. Plug the charger into a power supply (wall outlet, power strip, etc.)
2. Open the waterproof cover on the charging port, then plug the charger into
the charging port.
3. A red light means the scooter is charging; green means it is fully charged.
4. Cover the charging port once the charger is removed.
Note: If the scooter is known to not be fully charged when plugging charger in,
and the light turns green, the charger is likely faulty.
Please contact service at suppot@roadrunnerscooters.com
To Next Page
Loading...