RS5 OWNERS MANUAL
19
Error Codes
E-001 Rear motor haul error - swap front and rear
motor heads. If code still appears, replace
the controller. If it does not appear,
replace the motor.
E-003 Controller error - change the controller and
try again
E-005 Voltage error - battery is low; charge the battery
and try again
E-006 Receiver error - replace instrument/controller
and try again
E-007 Sending error - replace instrument/controller
and try again
E-009 Controller temperature error - Controller’s
temperature is too high
E-011 Front motor haul error - swap front and rear
motor heads. If code still appears, replace the
controller. If it does not appear, replace the
motor.
E-013 Secondary controller failure - Change the
controller and try again
E-017 Sub-controller receiving failure - replace
instrument/controller and try again
To Next Page
Loading...
