RS5 OWNERS MANUAL
8
USING CHARGING PORTS ON SIDE DECK OF SCOOTER
01
Plug the charger into a 120V power
supply (wall outlet, power strip, etc.)
02
Open the waterproof cover on the
charging port on the side deck, then
plug the charger into the scooter.
03
A red light means the Scooter is
charging; green means it is fully
charged.
04
Cover the charging port once the
charger is removed.
USING CHARGING PORTS ON BATTERY:
0 1
Open deck lid of scooter. Unplug the quick-connect plug
attached to the battery and remove battery from scooter.
0 2
Plug the charger into a 120V power supply
(wall outlet, power strip, etc.)
0 3
Open the waterproof cover on the charging port on the battery,
then plug the charger into the charging port.
0 4
A red light means the Scooter is charging;
green means it is fully charged.
05
Cover the charging port once the charger is removed.
For faster charging, a second 5 amp charger can be used in the
second charging port to charge the battery at twice the rate.
DO NOT USE TWO FAST CHARGERS AT THE SAME TIME!
Charging the Scooter
To Next Page
Loading...
