RS5 OWNERS MANUAL
24
0 2
Cleaning
Brake Components: Clean the brake calipers, rotors, and
pads regularly to remove dirt and grime.
Use a brake cleaner or isopropyl alcohol to clean the
brake components. Avoid using water or soap, which can
leave residues
Avoid Contaminants: Keep the brake components free
from oil, grease, and other contaminants.
If any brake parts get contaminated, clean them
immediately with brake cleaner.
0 3
Usage Tips
Brake Bedding: After installing new brake pads or rotors,
perform a bedding-in process. This involves gradually
increasing the braking force to create a smooth and even
surface on the pads and rotors.
Perform several slow stops to medium stops to allow the
brakes to adjust properly.
Brake Application: Apply the brakes smoothly and
evenly to avoid sudden stops, which can cause excessive
wear and heat buildup.
Use both front and rear brakes simultaneously for
balanced stopping power.
NUTT Hydraulic Brakes
To Next Page
Loading...
