button one time, you will hear a “dingdong” voice, it
certify speaker is searching another speaker. If you
have another macroboom on hand, pls power on
and then press TWS button one time, this two
speaker will connect within 10s-15s. Once two
speaker connceted, you can hear a “ding” voice, this
two speakers will be a Left/Right channel. Or you
can power on one macroboom, press TWS button
one time; in the meantime, power on another
macroboom press TWS button,this two speaker will
pair directly; once two speaker connected, you can
press one of speaker’s power button two times,it
will turn into BT mode and your smartphone can
connect it. when it’s TWS searching mode, LED
indiator light will blink blue/red color quickly; once
connected or can’t find another speaker, indiator
light will blink blue color slowly.
LED Flash Indicator will provide the status of the
mode, such as Bluetooth pairing mode.
Battery power indicator will provide the power
status of your Macroboom and if the indicator only
shows one bar, please charge your Macroboom.
When fully charged, the LED will not blink.
To Next Page
Loading...