1,Press the Power Standby button to turn the
Macrobom on or off. When turned off, Macroboom
remains in standby mode. Please note that Main
Power Switch on the back panel needs to be set on
for Power Standby Switch button to operate.
2, Press the power button around 5s, it will turn into
BT Pairing mode.
3, When your smartphone connected with
Macroboom and playing music, you can use this
power button pause/play music.
4, When you get a phone call, you can press this
power button one time to answer, press one time
to end calling.
5, If you want Macroboom turn into pairing mode
again, press this power button two times.
Press this button one time, it’s next music;Press this
button for a long time, volume will increase.
Press this button one time, it’s previous music;
press this button fora long time,volume will
decrease.
Press TWS button one time, it will turn into TWS
mode;press TWS button two times, drop out TWS
mode.When you want to use TWS function, you can
connect with one macroboom first, then press TWS
To Next Page
Loading...