pre set times on the timer. Press the (Accept) button to confirm selection and the
display reverts to the main menu. If the timer is in AUTO mode, pushing any Timer
key will reactivate the unit. The unit will operate normally until the next programmed
“Off” time.
C) To Set Sleep Delay Time.
Select the Sleep on/off mode (Prog>Sleep DelayTime>Accept)
Display Shows: “Sleep Delay Time” “ OFF”.
The sleep function puts the unit in a standby mode after user defined period.
The Sleep Delay will be factory set to OFF as the default setting. Pressing the (UP)
button increases the delay time up to 6 hours. Press the (Accept) button to confirm
selection and the display reverts to the main menu. The unit will go into “Sleep”
mode if it has not been used for the “Sleep Delay Time” period. To exit “Sleep”,
push any Timer key.
D) To Set ON/OFF Times
Select the Timer ON/OFF mode
(Prog>Set ON/OFF times>Accept)
Note: to set the unit to be in off mode for an entire day, set the “on” and “off” times
to be the same eg: On = 0:00 Off = 0:00
Display Shows: “SUN” “7:00 – 7:00” “Set ON hour”.
Press the (UP) button until the desired hour appears on the screen and press the
(Accept) button to confirm selection.
Display Shows: “SUN” “7:00 – 7:00” “Set ON minute”.
Press the (UP) button until the desired minute appears on the screen and press the
(Accept) button to confirm selection.
Display Shows: “SUN” “7:00 – 7:00” “Set OFF hour”.
Press the (UP) button until the desired hour appears on the screen and press the
(Accept) button to confirm selection.
Display Shows: “SUN” “7:00 – 7:00” “Set OFF Minute”.
Press the (UP) button until the desired minute appears on the screen and press the
(Accept) button to confirm selection and advance to the next day.
Display Shows: “MON” “7:30 – 15:30” “Set ON hour”.
Note: Continue with same procedure for Monday through to Saturday.
E) Filter Life
Select the Appropriate Filter Mode
Remaining Life
Filter Reset
To Next Page
Loading...