To Next PageTo Next Page
Need help?Do you have a question about the ROBBE HeliCommand 3A and is the answer not in the manual?
Describes LED indicators for normal operational modes and status.
Explains LED signals during the system setup process.
Details LED error codes indicating system faults during self-test.
Explains the use and settings of the pilot channel for mode switching.
Details the integrated tail rotor gyro, its modes, and settings.
Details advanced features of the 3D version for inverted and aerobatic flight.
Explains the RIGID version for flybar-less helicopters and its benefits.
Overview of the professional version for advanced applications.
Covers essential steps for physically installing the HeliCommand unit.
Guides on configuring the RC transmitter for use with HeliCommand.
Details the initial system configuration process for matching the model.
Explains the correct procedure for powering on the HeliCommand unit.
Provides essential advice for safely taking off with the HeliCommand system.
Offers fundamental advice for operating the helicopter with the system.
Specific setup considerations for electric-powered models.
Instructions for resetting the HeliCommand to its default factory settings.
Essential transmitter settings required for HeliCommand operation.
Process for teaching the system the transmitter's neutral stick positions.
Includes calling up set-up mode and storing settings for steps 1-5.
Steps to teach the system the correct direction of transmitter stick inputs.
Configuring the collective pitch servo movement and linkage type.
Setting up elevator and aileron servo movements and linkage types.
Ensuring correct direction of tail rotor servo movement.
Configuring sensor orientation and main rotor rotation direction.
Details available RIGID mode settings (OFF, FIX, FADER) for flybar-less helis.
Essential checks of sensors and control directions before the first flight.
Guidance for beginners on conducting the initial test flights.
Specific vibration testing for models with internal combustion engines.
Advice on setting the stabilization gain for optimal flight performance.
How to use the automatic trim feature for flight adjustments.
Specific trimming procedures for the tail rotor system.
Advice on performing take-offs and landings with the HeliCommand.
Guidance for achieving stable hovering with the system.
Information on adjusting transmitter control travels for optimal performance.
Explanation of how the opto-sensor works for position mode.
How to fly in low contrast environments and mode limitations.
Specific advice for flying the helicopter indoors.
Method for checking ground contrast for optimal sensor performance.
Details the basic 3A version and its limitations for 3D flying.
Features of the 3D version for advanced flight and 3D maneuvers.
Advice for performing complex 3D maneuvers with the system.
Use cases and benefits of the RIGID version for flybar-less models.
Specific handling advice for experienced pilots using the system.
Clarifies the intended use and limitations of the HeliCommand system.
Troubleshooting common issues with servos and transmitter controls.
Diagnosing and resolving problems with flight stability and performance.
Addressing issues related to inverted flight and aerobatic maneuvers.
General