Need help?Do you have a question about the Robe ColorSpot 700E AT and is the answer not in the manual?
Warning about high voltage and potential for dangerous electric shock when touching wires.
Instructions on power cord handling, grounding, voltage checks, and qualified personnel for connections.
Caution against looking directly into the light source to prevent eye damage.
Device designed for indoor use; avoid heat, moisture, dust, shaking, and improper lifting.
Do not operate with open cover, avoid exceeding max ambient temp, replace damaged lamps/lenses.
Identifies front lens, pan lock, base, handle, head yoke, and tilt lock buttons.
Lists rear panel connections (power, DMX, RJ45) and front panel controls (display, buttons).
Instructions for connecting to mains power, emphasizing earthing for safety and fuse replacement.
Step-by-step guide for safely installing the lamp and fine-tuning its position for optimal light.
Procedure for replacing dichroic filters on the colour wheel.
Steps for inserting new static gobo modules into the gobo wheel.
Guide for removing and inserting rotating glass gobos.
Instructions for swapping out the animation wheel.
Emphasizes national norms, authorized installation, structural integrity, secondary safety, and expert approval.
Requirements for placement, professional rigging, and fire safety when mounting.
Steps for attaching omega holders and securing the safety rope for mounting.
Explains DMX socket wiring and the need for shielded twisted-pair cables.
Instructions for connecting fixtures in a DMX chain and using a terminator.
Overview of Art-Net protocol, IP address identification, and RJ-45 connections.
Details on patch cable wiring and direct Ethernet operation setup.
Defines DMX channels for Pan, Tilt, speed, and time settings.
Channels for colour wheel, CMY mixing, CTO filter, and gobo wheel functions.
DMX channels for animation wheel, prism, frost, iris, and effect control.
Channels for controlling zoom, focus, shutter, strobe, and dimmer intensity.
How to assign DMX addresses and control fixture functions remotely via DMX.
Lists functions like lamp control, colour mixing, gobos, animation, prism, iris, zoom, and dimmer.
Menu path for setting DMX address, Ethernet mode, IP address, and Art-Net Universe.
Accessing data like power-on time, lamp status, temperatures, and DMX channel values.
Checking software versions and identifying product details like MAC address.
Setting the DMX start address, Ethernet mode, IP address, and Art-Net Universe.
Accessing operational data like power-on time, lamp status, and temperature readings.
Recalling user settings, configuring lamp behavior, display, fan modes, and dimmer curves.
Managing lamp on/off, test sequences, manual mode, stand-alone settings, resets, and special functions.
Entering power down mode and understanding RDM protocol for device management.
Description of common error messages and their potential causes.
Details on power supply, voltage, fuses, lamp, ballast, optical system, and zoom range.
Specifications for gobo wheels, animation wheel, prism, iris, frost filter, and other effects.
Information on electronics, control system, pan/tilt, and mounting hardware.
Maximum ambient/housing temperatures and minimum safety distances.
Diagrams and data showing beam angle, intensity, and diameter at different zoom levels.
Importance of cleaning for performance and lifespan, and recommended cleaning materials.
Step-by-step instructions for accessing and replacing air filters in the fixture head and base.
Detailed steps for safely removing and replacing fuses, ensuring correct type and rating.
Illustrations showing the arrangement and numbering of gobos in both wheels.
Catalog numbers and visual representations of gobos in Gobo-set 15.
Images and catalog numbers for optional animation wheels like Radial, Spiral, and Linear breakup.
Visuals and catalog numbers for various optional animation wheels.
Warning about high voltage and potential for dangerous electric shock when touching wires.
Instructions on power cord handling, grounding, voltage checks, and qualified personnel for connections.
Caution against looking directly into the light source to prevent eye damage.
Device designed for indoor use; avoid heat, moisture, dust, shaking, and improper lifting.
Do not operate with open cover, avoid exceeding max ambient temp, replace damaged lamps/lenses.
Identifies front lens, pan lock, base, handle, head yoke, and tilt lock buttons.
Lists rear panel connections (power, DMX, RJ45) and front panel controls (display, buttons).
Instructions for connecting to mains power, emphasizing earthing for safety and fuse replacement.
Step-by-step guide for safely installing the lamp and fine-tuning its position for optimal light.
Procedure for replacing dichroic filters on the colour wheel.
Steps for inserting new static gobo modules into the gobo wheel.
Guide for removing and inserting rotating glass gobos.
Instructions for swapping out the animation wheel.
Emphasizes national norms, authorized installation, structural integrity, secondary safety, and expert approval.
Requirements for placement, professional rigging, and fire safety when mounting.
Steps for attaching omega holders and securing the safety rope for mounting.
Explains DMX socket wiring and the need for shielded twisted-pair cables.
Instructions for connecting fixtures in a DMX chain and using a terminator.
Overview of Art-Net protocol, IP address identification, and RJ-45 connections.
Details on patch cable wiring and direct Ethernet operation setup.
Defines DMX channels for Pan, Tilt, speed, and time settings.
Channels for colour wheel, CMY mixing, CTO filter, and gobo wheel functions.
DMX channels for animation wheel, prism, frost, iris, and effect control.
Channels for controlling zoom, focus, shutter, strobe, and dimmer intensity.
How to assign DMX addresses and control fixture functions remotely via DMX.
Lists functions like lamp control, colour mixing, gobos, animation, prism, iris, zoom, and dimmer.
Menu path for setting DMX address, Ethernet mode, IP address, and Art-Net Universe.
Accessing data like power-on time, lamp status, temperatures, and DMX channel values.
Checking software versions and identifying product details like MAC address.
Setting the DMX start address, Ethernet mode, IP address, and Art-Net Universe.
Accessing operational data like power-on time, lamp status, and temperature readings.
Recalling user settings, configuring lamp behavior, display, fan modes, and dimmer curves.
Managing lamp on/off, test sequences, manual mode, stand-alone settings, resets, and special functions.
Entering power down mode and understanding RDM protocol for device management.
Description of common error messages and their potential causes.
Details on power supply, voltage, fuses, lamp, ballast, optical system, and zoom range.
Specifications for gobo wheels, animation wheel, prism, iris, frost filter, and other effects.
Information on electronics, control system, pan/tilt, and mounting hardware.
Maximum ambient/housing temperatures and minimum safety distances.
Diagrams and data showing beam angle, intensity, and diameter at different zoom levels.
Importance of cleaning for performance and lifespan, and recommended cleaning materials.
Step-by-step instructions for accessing and replacing air filters in the fixture head and base.
Detailed steps for safely removing and replacing fuses, ensuring correct type and rating.
Illustrations showing the arrangement and numbering of gobos in both wheels.
Catalog numbers and visual representations of gobos in Gobo-set 15.
Images and catalog numbers for optional animation wheels like Radial, Spiral, and Linear breakup.
Visuals and catalog numbers for various optional animation wheels.
General| Type | Moving Head |
|---|---|
| Light Source | 700W discharge lamp |
| Prism | 3-facet rotating prism |
| Zoom | Yes |
| Frost | Yes |
| Pan | 540° |
| Tilt | 270° |
| Control Protocol | DMX512 |
| Focus | Motorized |
To Next Page