Robe RoboSpot Base Station - User Manual

Version 4.5

Summary

RoboSpot Safety Instructions

RoboSpot System Overview

RoboSpot Base Unit Identification

Detailed labeling of the RoboSpot base unit and its various parts.

FollowSpot Controller Interface Details

RoboSpot Installation Guide

Monitor Installation Steps

Procedure for mounting the monitor and connecting necessary cables to the RoboSpot.

Tripod and Adaptor Installation

Monitor Shield and Note Holder Attachment

RoboSpot System Connection Guide

Connecting BMFL FollowSpot with Camera

Diagram and steps for connecting RoboSpot with BMFL FollowSpot and camera.

RoboSpot Basic Operation

Assigning Functions to Controls

Mapping fixture functions to jog-wheels and faders on the FollowSpot Controller.

RoboSpot Channel Control Influence

RoboSpot LCD Touchscreen Interface

RoboSpot Sliders Menu Functions

RoboSpot Camera Menu Options

RoboSpot User Menu Functions

RoboSpot Colour Control Features

RoboSpot Service Menu Access

Streaming RoboSpot Camera Video

Managing FollowSpot Controller Presets

RoboSpot Handle Calibration Procedure

RoboSpot Multi Device Control (MDC) Setup

MDC Setup Important Notes

MDC Follow Spot Operation Example

MDC Height Mode Selection

MDC Height Level Range Examples

RoboSpot Intensity Mapping Setup

RoboSpot Dimmer Curve Settings

RoboSpot Intensity Transition Modes

RoboSpot PosiStageNet Configuration

Setting Reference Fixture Height

Defining the height of the reference fixture's tilt axis above the stage.

Setting New Coordinate Origin

Displaying PSN Coordinates

Enabling the display of PosiStageNet coordinates on the screen.

RoboSpot Control Menu Navigation

FollowSpot Controller Main Menu (Page 1)

Accessing Functions Mapping, Show Library, and Device Settings from the main menu.

Mapping Fixture Functions to Controls

RoboSpot Show Library Management

Exporting RoboSpot Shows to USB

Importing RoboSpot Shows from USB

Controlling All Fixture Lamps

RoboSpot Device Settings Configuration

RoboSpot RDM Device Discovery

RoboSpot System Settings

RoboSpot Error and Information Messages

RoboSpot Technical Specifications

RoboSpot Maintenance and Cleaning

Replacing the Fuse

Step-by-step instructions for safely replacing the fuse in the RoboSpot unit.

Robe RoboSpot Base Station Specifications

General

Power Supply	100-240V AC, 50/60Hz
Display	LCD touchscreen
Ethernet Port	Yes
USB Port	Yes
Control Protocol	DMX, Art-Net, sACN
Operating Temperature	-10° C to +40° C (14° F to 104° F)
Storage Temperature	-20°C to 60°C
Humidity	95% (non-condensing)
Wireless Range	Not applicable
Wireless Protocol	Not applicable