Robe RoboSpot Base Station - Exporting RoboSpot Shows to USB; Importing RoboSpot Shows from USB

60
Export Show - the menu item allows you to save a show on a USB ash drive connected to the USB port of
the RoboSpot. Supported le systems of the USB ash drive are: FAT16, FAT32, EXT2, EXT3, EXT4.
To export a show.
1. Connect a USB ash drive to the USB port marked USB 50mA.
2. Select desired show (e.g. Show 3) and conrm it.
2. The virtual keyboard will appear on the screen with a name of the show le. You can edit the name of the
show and conrm it by the key ENT. The show le on the USB ash drive will have extension rsl
(e.g. RSShowLibrary-03.rsl).
If the import is successful, the notice: "Export Show OK" will appear for a moment on the screen.
Error and notice messages:
"Export Show Error ID:" - it means that the show library export failed. If ID=-1, it means that show le
cannot be saved on the USB ash drive(e.g. the USB ash drive is set read-only)
"USB ash drive is not present "- it means that the USB ash drive is not connected to the USB port of
the RoboSpot.
Import Show - the menu item allows you to load a show le saved on a USB ash drive connected to the USB
port of the RoboSpot.
To import a show.
1. Connect a USB ash drive to theUSB port marked USB 50mA.
2. Select a show (e.g. Show 1) to which you want to load a show le from the USB ash drive and conrm it.