Robe RoboSpot Base Station - Page 61

61
3. The list of available show les on the USB ash drive will appear on the LCD screen e.g.
4.Select desired show le (e.g. Show 6.rsl) and touch the button "Load" to import selected show le to
the RoboSpot. If the import is successful, the notice: "Import Show OK" will appear.
Error and notice messages:
"No show les on USB ash drive" - it means that no show le was found on the USB ash drive.
" Import Show Error! " it means that some problem has occurred during writing of show le to the internal memory
drive of the RoboSpot
"USB ash drive is not present " - it means that the USB ash drive is not connected to the USB port
of the RoboSpot.
" Err: Cannot nd show le " - it means that the show le cannot be loaded from the USB ash drive.
" Err: Wrong version of show le" - it means that the show le has a wrong format.
Note. You can load to selected show any show le, for example, to the show 10 you can load the le RSShowLi-
brary-02.rsl. Original show le in the show 10 will be overwritten.
New Show - the menu item allows you to crate a new show.
Select a show (e.g. RS Show 3) in which you want to create the new show and conrm it. Original show (saved
in RS Show 3) will be deleted.