Robe RoboSpot Base Station - RoboSpot Technical Specifications

66
9. Technical specications
Supported xtures: Robin BMFL FollowSpot/Spot/Blade/WashBeam, Robin Pointe, Robin Forte
MegaPointe, Robin iPointe, Robin iPointe65, DL4S, DL7S,Robin T1/T2 Prole,
Robin MMXWashBeam, Robin MMX Blade, Robin T1 Prole FS, Robin LedBeam 150,
Robin Spiider, Robin Tarrantula, Robin Viva CMY, Robin SilverScan,
Robin Esprite/Esprite FS, Robin Spote, Robin Cuete, Robin Promotion, Robin iSpiider,
Robin LEDBeam 350
Input voltage: 100-240V AC
Power consumption: 15W (power factor=0.43, I=0.12A at 230V)
Fuse: T 2 A
LCD Monitor: ASUS VT168 H (panel size:15.6" , max. resolution:1366 x 768)
Setting & Control: graphic touch screen
Protocols: RDM, ArtNet, sACN,gMA I, gMA II,
support of PosiStageNet protocol on both outputs (Camera, Ethernet)
Control elements: 20 buttons, 4 jog-wheels and 2 faders
Connection: DMX In/Out: Locking 3-pin and 5-pin XLR
Ethernet: RJ 45
Camera: RJ 45
AC power: Neutrik PowerCon, A-type, NAC3MPA
Monitor: HDMI
USB lamp: 2x USB socket +5V/50mA
1 x USB
Pan range: +/- 80°
Tilt range: +/- 40°
Fastening: via adaptor on tripod
Maximum ambient operating temperature : 40° C
Minimum ambient operating temperature: 0°C
Dimensions (mm)