Do you have a question about the Robe Robin Esprite and is the answer not in the manual?
Covers cautions, warnings, handling power cords, grounding, and general safety.
Warns about risk of eye injury from direct LED exposure.
Details wiring, grounding, and voltage connection requirements.
Covers safety, structure, securing, and proper placement for rigging.
Explains DMX input/output, chaining, and termination.
Covers Art-Net protocol, IP addressing, and network setup.
Details using the Lumen Radio CRMX module for wireless DMX.
Configuration of DMX address, presets, and Ethernet settings.
Reading fixture operating hours and air filter status.
User modes, DMX input, and pan/tilt settings.
DMX value adjustment and effect calibration.
Lists supported RDM commands for device configuration and monitoring.
Explains icons and lists common error messages for troubleshooting.
Details specific error messages like EEprom, battery, fan, and overheating faults.
Covers cleaning frequency, methods, and precautions for fixture upkeep.
Covers cautions, warnings, handling power cords, grounding, and general safety.
Warns about risk of eye injury from direct LED exposure.
Details wiring, grounding, and voltage connection requirements.
Covers safety, structure, securing, and proper placement for rigging.
Explains DMX input/output, chaining, and termination.
Covers Art-Net protocol, IP addressing, and network setup.
Details using the Lumen Radio CRMX module for wireless DMX.
Configuration of DMX address, presets, and Ethernet settings.
Reading fixture operating hours and air filter status.
User modes, DMX input, and pan/tilt settings.
DMX value adjustment and effect calibration.
Lists supported RDM commands for device configuration and monitoring.
Explains icons and lists common error messages for troubleshooting.
Details specific error messages like EEprom, battery, fan, and overheating faults.
Covers cleaning frequency, methods, and precautions for fixture upkeep.
| Zoom Range | 5.5° - 50° |
|---|---|
| Animation Wheel | Yes |
| Pan Range | 540° |
| Tilt Range | 270° |
| Control Protocol | DMX, RDM, Art-Net, MA Net, MA Net2, sACN |
| Power Supply | 100-240V AC, 50/60Hz |
| Color Mixing | CMY/RGB |
| Gobo Wheel | 2 rotating gobo wheels |
| Framing Shutters | 4 individually positionable blades |
| Light Source | 650W White LED Engine |
| Light Output | 27, 000 lm |










