Robe Robin Esprite - 7.3 Tab Personality

27
Actual Module Info - Use the item to read current information about the LEDs module installed in
the xture.
Serial Number/ Device UID - a serial number of the LEDs module/RDM UID of the xture.
Measurement Date/Time - a date/time of running the procedure "LEDs Measure" in the tab
Service.
Intensity - the item shows a light intensity of the LEDs module measured after running
the procedure "LEDs Measure" in the tab Service. The light intensity is displayed in percentages
in relation to the initial intensity of the new LEDs module (initial intensity=100%).
LEDs On Time Total/Adaptive - Total: a total time of the LEDs module operation during which
the dimmer intensity was > 0%.
Adaptive: a relative time of the LEDs module operation during which the dimmer intensity
was > 0% (e.g. if dimmer = 50% for one hour, the adaptive time is 0.5 hour, if dimmer = 100%
for one hour, the adaptive time is 1 hour).
Assembly History - Use the item to read a history of the LEDs module installed in the xture (its serial
number, RDM UID of xture at which was installed and date/time of installation).
Up to 31 records can be saved in the menu item.
Intensity History - Use the item to read a history of light intensity of the LEDs module installed in the xture.
Serial Number/ Device UID - a serial number of the LEDs module/RDM UID of the xture.
Measurement Date/Time - a date/time of running the procedure "LEDs Measure" in the tab
Service.
Intensity - the item shows a light intensity of the LEDs module measured after running
the procedure "LEDs Measure" in the tab Service. The light intensity is displayed in percentages
in relation to the initial intensity of the new LEDs module (initial intensity=100%) .
Up to 31 records can be saved in the menu item.
LED Modules History - Use the item to read a history of the LEDs modules installed in the xture (their serial
numbers and date/time of installation).
Up to 31 records can be saved in the menu item.
View Logs - Use this menu to read xture´s data which have been recorded during xture operation. This
collected data allows easier troubleshooting.
Fixture Errors - Use this menu to read xture errors which have occurred during xture operation.
Fixture States - In the menu are recorded xture states as power on and power o󰀨.
Fixture Positions - In the menu are recorded installation positions of the xture:
Fixture Temperatures - In the menu are recorded temperatures which have exceeded dened levels.
Note: The log bu󰀨er can contain max. 8000 records. If the bu󰀨er is full, old data will be overwritten.
7.3 Tab "Personality"
User mode - The Robin Esprite allows you to recall two user settings. After switching the xture on for the rst
time, the User A settings is active. Now all changes made in the “Personality” menu , ”Addressing” menu and the
“Music Trigger“ and “ Preset Playback“ items from the “Stand-alone” menu are saved to the User A settings. If
you now select the User B settings, from this moment the changes made in these menus will be saved to the
User B settings. After switching the xture o󰀨 and on, the User B setting is active. In this way you may use the
two xture operating behaviours.
User A Settings - the function recalls the user A settings.
User B Settings - the function recalls the user B settings.