26
Fixture Temperatures - The menu is used to view temperatures of the xture´s inside.
LEDs temperature - The menu shows temperature on the LED PCB in the light source
Current - A current temperature of the LED PCB.
Maximum NonRes. - A maximum temperature of the LED PCB since the xture has been
fabricated.
Maximum Res. - A maximum temperature of the LED PCBs since the counter
was last reset.
In order to reset some counter to 0, touch desired text box under item "Max.Res."
Driver Temperature - The menu shows temperature on the LEDs control PCB in the xture head.
Current - A current temperature on the LEDs control PCB.
Maximum NonRes. - A maximum temperature on the LEDs control PCB since
the xture has been fabricated.
Maximum Res. - A maximum temperature on the LEDs control PCB since the counter
was last reset.
In order to reset this counter to 0, touch the text box next to the item "Maximum Res.
Base Temperature - The menu shows temperature on the display PCB in the xture base.
Current - A current temperature on the display PCB.
Maximum NonRes. - A maximum temperature on the display PCB since the xture has
been fabricated.
Maximum Res. - A maximum temperature on the display PCB since the counter
was last reset.
In order to reset this counter to 0, touch the text box next to the item "Maximum Res."
DMX Values - The menu items allows you to read DMX values of each channel received by the xture.
Wireless State - The menu serves for reading of the wireless operation status.
Unlink Wireless Adaptor - The item serves for unlinking the xture from a DMX transmitter.
If the wireless module is not installed in the xture, message" Wireless Module Not Installed" will appear.
Power Channel State - Select this item to see current setting of the functions, which can be set by menu items
in "Personality" as well as by DMX command at channel "Power/Special functions".
Colour Functions State - Select this item to see current setting of the colour functions, which can be set by
menu items in "Personality" as well as by DMX command at channel "Colour functions".
Software Version - Select this item to read the software version of the xture processors:
Display System - A display processor on the display board in the xture base
Module M - a Pan/Tilt processor
Module L - a LEDs control processor
Module O - a Focus/Zoom/Prism control processor
Module F-A -a Framming shutters control processor
Module F-B - a Framming shutters + Iris control processor
Module G - a Rot. gobo/Static gobo wheel control processor
Module FR - a Frost control processor
Module C1 - a Colour wheel 1 control processor
Module C2 - a Colour wheel 2 control processor
Product IDs - The menu is used to read the MAC Address ,RDM UID and RDM Label.
LED Module Info - Use this menu to read LEDs module information.
First Module Assembly - Use the item to read initial information about the LEDs module installed in
the xture. The xture has to be connected to mains to read the values in the menu items.
Serial Number/ Device UID - a serial number of the LEDs module/RDM UID of the xture.
Installation Date/Time - a date/time of the rst installation of the LEDs module to a
some Esprite device.
Intensity - an original intensity of the LEDs module in percentages (100%).
LEDs On Time Total/Adaptive - Total: a total time of the LEDs module operation during which
the dimmer intensity was > 0%.
Adaptive: a relative time of the LEDs module operation during which the dimmer intensity
was > 0% (e.g. if dimmer = 50% for one hour, the adaptive time is 0.5 hour, if dimmer = 100%
for one hour, the adaptive time is 1 hour).
To Next Page
Loading...
