Need help?Do you have a question about the Robe XT Series and is the answer not in the manual?
Follow safety instructions and warnings for safe operation and to maintain warranty.
Device is for indoor use. Avoid brute force, extreme heat, moisture, dust. Operate only if familiarized.
Lists intelligent centerpiece features: cylinder effect, stepper motors, prisms, gobos, colors, DMX compatibility.
Diagram and list of main projector components: mirror head, objective, cylinders, DMX ports, DIP switches.
Instructions for installing the HMI 1200W lamp, cautioning against touching glass bulbs and using correct wattage.
Fire hazard warning: keep flammable material 0.5m away. Ensure secure mounting and use safety chain for overhead use.
Electric connection must be done by a qualified employee. Connect projector to mains plug.
Connect controller via shielded cable and XLR-connectors. Adjust starting address as shown in 3.5.
Instructions on how to adjust the starting address to run the test sequence.
Guide to adjusting the starting address for connection with a Universal DMX Controller.
Upon power-on, motors reset, device ready within approx. 10 seconds.
The operation LED flashes if the projector is connected via DMX but receives no data.
Detailed breakdown of DMX channels, their values, functions, and control types for the projector.
Follow safety instructions and warnings for safe operation and to maintain warranty.
Device is for indoor use. Avoid brute force, extreme heat, moisture, dust. Operate only if familiarized.
Lists intelligent centerpiece features: cylinder effect, stepper motors, prisms, gobos, colors, DMX compatibility.
Diagram and list of main projector components: mirror head, objective, cylinders, DMX ports, DIP switches.
Instructions for installing the HMI 1200W lamp, cautioning against touching glass bulbs and using correct wattage.
Fire hazard warning: keep flammable material 0.5m away. Ensure secure mounting and use safety chain for overhead use.
Electric connection must be done by a qualified employee. Connect projector to mains plug.
Connect controller via shielded cable and XLR-connectors. Adjust starting address as shown in 3.5.
Instructions on how to adjust the starting address to run the test sequence.
Guide to adjusting the starting address for connection with a Universal DMX Controller.
Upon power-on, motors reset, device ready within approx. 10 seconds.
The operation LED flashes if the projector is connected via DMX but receives no data.
Detailed breakdown of DMX channels, their values, functions, and control types for the projector.
The Dominator 1200 XT is an intelligent centerpiece designed for professional show lighting applications, offering a powerful and versatile array of effects. This multiscanner unit is capable of creating dynamic and engaging light shows, making it suitable for various entertainment environments. Its design emphasizes both performance and ease of use, with features that allow for extensive creative control and straightforward maintenance.
At its core, the Dominator 1200 XT functions as a sophisticated lighting fixture that projects a multitude of effects across a space. It incorporates a unique 6-fold multiscanner system, which is central to its ability to produce complex and varied light patterns. The device features multiple mirror heads, each capable of independent pan and tilt movements, allowing for precise positioning and dynamic sweeping effects. These movements are proportional, meaning they can be controlled smoothly across their full range, enabling subtle adjustments or rapid changes in direction.
One of the key usage features of the Dominator 1200 XT is its advanced effect generation. It includes two distinct effect wheels that can be mixed individually, providing a broad palette of visual options. The first effect wheel offers a range of gobos, including a full circle white, a multicolor gobo, and six distinct gobos with six different colors. This wheel also supports a vibrant rainbow effect, adding a burst of color to any scene. The second effect wheel expands on this by offering blackout capabilities, dimmer intensity control, another full circle white option, and specific color filters (magenta, cyan, yellow). A notable addition to this wheel is a rotating 3-fold prism effect, which can split and multiply the projected light, creating intricate patterns and textures.
The device also boasts innovative cylinder effects. It features mirrored cylinders whose rotation speed is freely controllable. These cylinders are integrated with the mirror heads, allowing for synchronized or independent movement. Specifically, there are controls for the rotation of mirrored cylinders between mirrorheads 1/2 and 4/5, and between mirrorheads 2/3 and 5/6, as well as between mirrorheads 3/4 and 6/1. These rotations can be anti-clockwise with decreasing speed, clockwise with increasing speed, or set to no rotation, providing a wide range of dynamic visual possibilities. The inclusion of stepper motors for these movements ensures smooth and precise control.
Another significant feature is the rotating 3-fold prism effect, which can be controlled for both anti-clockwise and clockwise rotation with varying speeds. This prism effect, combined with the gobos and color filters, allows for highly customized and layered visual outputs. The device also supports a multicolor effect, further enhancing its ability to create rich and diverse light shows.
For control, the Dominator 1200 XT is fully programmable via any standard DMX-512 controller, utilizing 12 control channels. This DMX protocol allows for granular control over each of its functions, from pan and tilt of individual mirror heads to the selection and rotation of gobos, colors, and prism effects. The DMX addressing is managed through DIP-switches, making it straightforward to set up the starting address for integration into a larger lighting rig. An operation LED provides visual feedback on DMX data reception, flashing if no data is received, which aids in troubleshooting.
The installation process is designed to be flexible, allowing the projector to be installed in any position without altering its operation characteristics. It includes a mounting bracket with an 8mm hole for secure fixing. For overhead use, the manual emphasizes the importance of fitting a safety chain or cord, highlighting a commitment to safety. The electrical connection must be carried out by a qualified employee, ensuring safe and proper setup.
Maintenance features are clearly outlined to ensure the longevity and optimal performance of the Dominator 1200 XT. Regular cleaning is crucial to prevent dust, dirt, and smoke fluid residues from building up, which can significantly reduce light output. The manual recommends using a soft, lint-free cloth moistened with a good glass cleaning fluid, explicitly advising against alcohol or solvents. The front mirror and objective lens require monthly cleaning due to smoke fluid residues. The cooling fan should also be cleaned monthly to maintain efficient heat dissipation. Gobos can be cleaned with a soft brush.
More extensive cleaning, such as for the dichroic color filters, gobo-wheel, and internal lenses, is recommended every three months. Annually, the interior of the projector should be cleaned using a vacuum cleaner or air jet. To ensure the proper function of the rotating gobos, lubrication is recommended every six months, with a caution against excessive oil to prevent spillage during rotation. The housing is designed for easy access to the lamp and main components through a large opening cover, simplifying maintenance tasks.
Safety instructions are paramount throughout the manual, emphasizing the need to keep the device away from rain and moisture and to unplug the mains lead before opening the housing. Warnings about high voltage and the danger of electric shock are prominently displayed. Users are cautioned against operating the device with an opened service lid due to the risk of burned skin from ultraviolet radiation emitted by discharge lamps. The lamp itself is noted as very shock-sensitive, and users are advised to follow the lamp manufacturer's notes during installation. Furthermore, the manual warns against installing a lamp with a higher wattage than specified, as this can generate excessive temperatures and void the warranty. Fire safety is also addressed, with a requirement to maintain a minimum distance of 0.5m from highly flammable materials.
In summary, the Dominator 1200 XT is a robust and feature-rich intelligent centerpiece that offers extensive creative control through its multiscanner system, diverse effect wheels, and DMX programmability. Its design incorporates both advanced lighting capabilities and practical considerations for installation and maintenance, ensuring reliable performance and a long operational life in professional show lighting environments.
General| Type | Moving Head |
|---|---|
| Light Source | LED |
| Pan Range | 540° |
| Tilt Range | 270° |
| Wattage | Varies by model |
| DMX Channels | Varies by model |
| Control | DMX, RDM |
| Weight | Varies by model |
| Dimensions | Varies by model |
| Beam Angle | Varies by model |
To Next Page