Robe RoboSpot Base Station - RoboSpot PosiStageNet Configuration; Setting Reference Fixture Height

44
5.9 PosiStage Net
The menu option allows you to use a PosiStageNet protocol (an open protocol for on-stage, live 3D position data).
Before activating the PosiStageNet protocol, the MDC setup has to be complete. The PosiStageNet protocol
is active on both Ethernet connectors (Camera IN/Update, Ethernet ) of the RoboSpot.
The item "On/O󰀨" activates/deactivates the PosiStageNet protocol.
The item "Ref. Height" allows you to set a height (in mm) of a tilt axis of the reference xture above the stage.
The item "Coord. O󰀨set" enables other options relating to coordinates.
Height of tilt axis of reference device
above the stage