17
Stereo / Mono setting - FM
Your radio will play stereo FM broadcasts in stereo provided that the
received signal is of adequate strength. However, as a stereo signal
becomes weaker the audio signal will become poorer. It may be preferable
to force the radio to play the station in mono in order to reduce the level
of background hiss.
1. Press and release the On/Off button to switch on your radio.
2. Repeatedly, press and release the Mode button until the FM mode is
selected.
3. Press and release the Menu button. The FM menu will show on the
display.
4. Rotate the Tuning control until 'AUDIO' shows on the display. Press
and release the Tuning control.
5. To switch to mono to reduce the hiss from a weak FM signal rotate
the Tuning control until 'MONO' appears on the display. Press and
release the Tuning control to confi rm the setting.
6. If you wish to return to the stereo mode while listening to the currently
tuned radio station follows steps 1 to 4 above. Rotate the Tuning control
until 'STEREO' stereo shows on the display. Press and release the
Tuning control to confi rm the setting. The radio will play the current
station in stereo if the signal is suffi ciently strong.
4-6
1
2
3
To Next Page
Loading...
