Presetting stations
You may store your preferred DAB and FM radio stations to the preset
station memories. There are 20 memory presets in your radio, 10 for
DAB and 10 for FM. Presets are remembered by your radio in the event
of a power failure.
The procedure for setting presets and using them to tune stations is the
same for FM and DAB modes, and is described below.
1. Press and release the On / Standby button to switch on the radio.
2. Press and release the Mode button (DAB or FM buttons on remote)
to select the desired waveband.
3. Tune to the required station as previously described.
4. Press and hold the Preset button. The display will show, for example,
'1: (Empty)' if no station has been stored to that preset.
5. Rotate the Tuning control (Tuning buttons on remote) to select the
desired preset station number under which you wish to store the station.
6. Press and release the Select button. The display will show for example,
'Preset 1 stored'. The station will be stored under the chosen preset.
Repeat this procedure for the remaining presets.
7. Stations which have been stored in preset memories may be overwritten
by following the above procedure.
20
Preset Store
<1: (Empty) >
BBC Radio 2
Now playing on the r
Preset 1
stored
4
5
6
2
To Next Page
Loading...
