Roberts Blutune65 - To Return to Auto Clock Set Mode

39
DAB
System Setting
<
<
System Setting
Time
<
<
Time
Auto update
<
<
Auto update
Update from Any
<
<
*
Auto update
Update from DAB
<
<
To return to auto clock set mode
1. Press and release the On / Standby button to switch on your radio.
2. Press and release the Menu button to enter the setup menu.
3. Rotate the Tuning control (Tuning buttons on remote) until 'System
Setting' appears on the display. Press and release the Select button.
4. Rotate the Tuning control (Tuning buttons on remote) until 'Time'
appears on the display. Press and release the Select button.
5. Rotate the Tuning control (Tuning buttons on remote) until 'Auto
update' appears on the display. Press and release the Select button.
6. Rotate the Tuning control (Tuning buttons on remote) to choose an
update option from 'Update from Any', 'Update from DAB', Update
from FM' or 'No update' as required. The current update option will
be marked with an asterisk. Press and release the Select button to
confi rm your choice. The radio will exit to the previous menu.
Note: If you select 'Update from Any', 'Update from DAB', Update from
FM' the current time received will be displayed. If no signal is found
you should either position the radio or its aerial so that a signal can be
received, or revert to manual clock mode (see page 37).
2
3-6
3-6