Roberts CR9986 - Checking alarm times

Checking the Alarm Times
1. To check Alarm 1 time, set the Alarm 1 function switch to the 'Adj'
position. Alarm 1 time will flash in the display.
2. Return the Alarm 1 function switch to the 'Off' position. The
display will revert to showing time.
3. To check Alarm 2 time, set the Alarm 2 function switch to the 'Adj'
position. Alarm 2 time will flash in the display.
4. Return the Alarm 2 function switch to the 'Off' position. The
display will revert to showing time.
Note: Incorrect display will result if both the Alarm function switches
are set to the 'Adj' position.
13
1
0FF ·
ON ·
ADJ ·
1
1
0FF ·
ON ·
ADJ ·
2
2
0FF ·
ON ·
ADJ ·
3
2
0FF ·
ON ·
ADJ ·
4
CR9986 Rev 1.pmd 5/19/2005, 8:28 AM14