Roberts DreamTime - Clock Display; Display Backlight Dimmer; Software Version

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
26
Clock display
1. When your clock radio is in standby mode the time and day will be
displayed. The time is always shown using a 24 hour clock format.
Display backlight dimmer
1. In order to adapt the intensity of the display to suit the ambient room
lighting, press the Dimmer button on your clock radio to select the
dimmer brightness from High-Mid-Low and Off.
Software version
The software display cannot be altered and is just for your reference.
Ensure your clock radio is switched on.
1. Press and hold the Menu button. "MANUAL" will appear on the
display.
2. Press the Tuning Up or Down buttons until the display shows your
clock radios software information.
3. After a few seconds your clock radio will return to the normal radio
display mode.
1
1
2
2