EasyManua.ls Logo

Roberts R876 - Setting the HWS Alarm

Roberts R876
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If you need any further advice, please call our Technical Helpline on :-
0181 758 0338 (Mon-Fri)
49
Setting the HWS (Humane Wake System) alarm
5. To cancel the alarm time, press the " " but-
ton, the display will flash " ", press the "C"
button to cancel the alarm time.
Note:
1. When the alarm is sounding, press the "Power/Sleep"
button to turn off the alarm for 24 hrs.
2. The radio alarm will last for one hour if not turned off
by pushing the "Power/Sleep" button.
3. Tune the radio to the required station before setting
the alarm. When the alarm operates the radio will play
the last station selected.
A repeating beep tone will sound when using the HWS alarm. The alarm beep will increase in volume every 15
seconds for 1 minute followed by 1 minutes silence before repeating the cycle. The HWS alarm will sound for 30
minutes unless turned of by pushing the "Power/Sleep" button.

Other manuals for Roberts R876

Related product manuals