3. Press the Enter button for more than 2 seconds,
the
2
dual time symbol will flash in the display.
14
4. Whilst the
2
dual time symbol is flashing, set the
correct time by pressing the numbered buttons. As you
press each button the corresponding number will show
on the display.
5. Press the Enter button to complete dual time setting.
If an incorrect time has been set the radio will beep
and the Err symbol will appear in the display. Reset
the correct time by pressing the numbered buttons
again.
2
Enter
Freq
Time Set
4
5
6
12
3
7
M
8
0
9
C
Tuning
AM /PM M emo Scan M em o Del
Enter
Freq
Time Set
Manual/Auto
To Next Page
Loading...
