Roberts RD-1 - System Settings and Defaults; Restoring Factory Defaults

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Factory default
This setting clears all station presets, service list and returns all variable
settings to their factory defaults.
1. Press the Setup button to enter Setup menu.
2. Rotate the Tuning control until the Factory Default line is high-
lighted in the display. Press in and release the Tuning control to
enter adjustment mode.
3. Rotate the Tuning control to select Yes. Press in and release the
Tuning control to confirm the selection.
4. The display will blank and after a few seconds your radio will enter
DAB Auto Tune.
Set-Up
Buzzer Alarm
Radio Alarm
Record Timer
AUTO
Set-up
1
Press
to select
TUNING
2
Set-Up
Sleep
KeyPress
Factory Default
AUTO
Factory Default
Return all user settings to
their factory default values
Are You Sure ? [ Yes ]
SA-01S
18:21 1st June 2004
AUTO
Press
to select
TUNING
4
DAB Auto Tune
0% 100%
Scanning 11d
Services Found :20
50