Roberts RD-1 - Audio Outputs and Connections; Using the Headphone Socket

Headphone socket
1. A 3.5mm Headphone Socket located on the left side of your radio
is provided for use with either headphones or an earpiece. Inserting
a plug automatically mutes the internal loudspeaker.
2. On the FM band if a station being received is weak some hiss may
be audible. To reduce the hiss press and hold in the Tuning control
until the display shows Information FM: Mono your radio will switch
to mono mode.
3. To return to stereo mode press and hold in the Tuning control until
the display shows Information FM:Stereo your radio will switch
back to stereo mode.
Note: Stereo is only available when using earphone/headphones
2
1
LEFT
DC IN
9~12V 2A
RDI
Aerial
RIGHT
Analogue
Audio Out
Digital Audio
Out
Information
FM:Mono
17:48 1st-June-2004
Information
FM:Stereo
17:48 1st-June-2004
Press
to select
TUNING
2
Press
to select
TUNING
3
51