7
Operating your radio - DAB
1. Fully extend the telescopic aerial.
2. Press the On/Off button to switch on your radio.
3. Rotate the Tuning control until the station list appears.
4. Continue to rotate the Tuning control until the required station
appears between the two black bars on the display.
5. Press in and release the Tuning control to select the station. The
required station will be selected and after a few seconds the
Dynamic Label System text (DLS) will appear on the display.
6. Adjust the Volume, Bass and Treble controls to the required
settings.
Note: To return to normal station mode from station list
without selecting a station press and release the Display
button.